Your shopping cart is empty!
Vitcas CFA Ceramic Fibre Adhesive up to 1400°C
£17.33
Ex VAT: £14.44
Ex VAT: £14.44
Vitcas products have minimum order value of £400 +VAT. Delivery cost for Vitcas products depends on order weight and delivery post code. We will send you correct delivery cost after you submit the order request as we need to check the cost with Vitcas.
Vitcas CFA Ceramic Fibre Adhesive is a high temperature adhesive that is specially designed for use in a wide range of applications, including refractory coatings and the bonding of ceramic fibre modules and laminates to brickwork or metal.
Characteristics:
- High-temperature adhesive for use in temperatures up to 1400°C
- Suitable for fixing ceramic fibre blanket and modules to brickwork or metal
- Ideal for use in pizza ovens, as well as for fixing ceramic fibre boards, paper, and mica boards to metal
- Can be used as a refractory coating
- Easy to apply
Instructions:
- Prepare the surface: Ensure that the surface to which the ceramic fibre material will be applied is clean, dry, and free from any dirt, dust, rust, or grease.
- Apply the adhesive: Apply the Vitcas CFA Ceramic Fibre Adhesive directly onto the substrate, NOT onto the ceramic fibre. Use a trowel or a brush to apply a thin layer of adhesive evenly across the surface.
- Apply the ceramic fibre: Place the ceramic fibre blanket, module, board, paper, or mica board onto the adhesive, making sure it is properly aligned and positioned. Press it firmly into place to ensure good adhesion.
- Allow to dry: Allow the adhesive to dry completely, which can take up to 24 hours depending on the temperature and humidity levels.
- Cure the adhesive: Once the adhesive is dry, cure it by gradually heating the bonded materials to the required temperature. This process should be carried out slowly and carefully to prevent any cracking or damage to the ceramic fibre.
Tags: vitcas, cfa, ceramic, fibre, adhesive, up, to, 1400°c, 106202, adhesives, &, sealers, vitcas
